Passive QSFP+ to 4 SFP+ Copper Breakout Cable

QSFP+ to 4 SFP+ Copper Breakout Cable 2M, Passive | QSFP-4SFP10G-CU2M

Fiberyes.com's revolutionary 2m (6.6 ft) QSFP to 4x SFP+ Splitter Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers.

For typical applications, users can install this splitter cable between an available QSFP port on their 40-Gigabit/s rated switch and feed up to four upstream 10GbE-SFP+ enabled switches. Each QSFP-SFP+ splitter cable features a single QSFP connector (SFF-8436) rated for 40-Gb/s on one end and (4) SFP+ connectors (SFF-8431), each rated for 10-Gb/s, on the other.

Fiberyes.com is the manufacturer of QSFP to 4 SFP+ Splitter Cables that designs and sources every subassembly in-house guaranteeing complete control over product performance, quality and consistency. Examples include our widely respected board-as-connector platform which is direct-welded to the wire and encased in a robust Zinc-Nickel backshell for superior crosstalk and EMI performance. Cable available in 1m (3.3ft), 2m (6.6ft), 3m (9.8ft) & 5m (16.4ft) lengths to accommodate your installation requirements.

This new version QSFP+ to 4 SFP+ breakout cable opens EEPROM for customer re-coding for different applications.

Passive QSFP+ to 4 SFP+ Copper Breakout Cable

Specifications:
● QSFP (40G) to 4x SFP+ (10G) Splitter Cable - 2m (6.6 ft)QSFP-4SFP10G-CU2M
● Connector A: (1) QSFP 40.0 Gb/s Rated Connector (SFF-8436 Compliant)
● Connector B: (4) SFP+ 10.0 Gb/s Rated Connectors (SFF-8431 Compliant)
● Economically Links up a QSFP port with an Upstream 10GbE-SFP+ Switch
● AWG30
● Protocol agnostic support of 40GbE, QDR InfiniBand, SAS & Fibre Channel
● Up to 10.3125 Gb/s transfer rate per SFP+ channel (40 Gb/s aggregate)
● Robust Zinc die-cast SFP+ & QSFP connectors with pull-to-release latching
● Bridge the gap between your 10G and 40G capable switches/host adapters
● Low cross-talk and pair-to-pair skew maintains signal integrity
● Fully compliant to the latest SFP+ & QSFP MSA (Multi-Source-Agreement)
● Supports all current 10-Gigabit Ethernet and 40-Gigabit Ethernet standards
● Designated form factor and electrical compliance for QDR InfiniBand
● The perfect direct attached storage splitter cable for Fibre Channel & SAS
● Enjoy a reduced power budget and lower port cost compared to optical
● Fully RoHS compliant for environmental protection

Source: www.fiberyes.com

Fiber Optical Transceiver - New Age Transceivers

Fiber Optical Transceiver - New Age Transceivers

A transceiver is a piece of equipment that combines both a receiver and a transmitter. They share a single housing or a common circuitry. If by any chance there is no common circuitry between the receiver and transmitter, then the machine is known as a transmitter-receiver. The term initially came into use back in the year 1920. Technically speaking, it is essential that a transceiver merge a fair amount of receiver and transmitter handling circuitry. A few similar devices would be the repeaters, transverters, transponders and many others.

 A transceiver is a commonly used term and device in radio terminology and functions. It was very common to have the units separated. The ham radio operators used to set up their own devices, and it was easy to build and design a simple unit, having one feature as transmitting and receiving. The overall amateur modern radio devices in use are transceivers. At the same time, there exists an active demand for pure radio receivers. A perfect example of the transceiver would a CB radio or a walkie talkie.

 Eminent brands have come up with new age transceiver products that cater to the needs of customers and IT professionals. There are companies that specialize in Cisco compatible transceivers of superior quality. Transceivers can be categorized as

 1. IR transceivers
 2. Optical transceivers
 3. Cisco transceivers
 4. Fiber transceivers

 Let us have a look at some of the transceiver product variants that are available in the market.

 Single Mode Fiber transceiver

 Features:
 1. Hot Pluggable
 2. 10GBASE-LR
 3. Duplex LC Connector Interface
 4. Connects to Single-Mode Fiber
 5. 1310nm Wavelength

 Multi-Mode Fiber transceiver

 Features:
 1. Complies with X2 Multi-Source Agreement
 2. Advanced VCSEL laser, up to 300m reach
 3. Digital Diagnostics Monitoring Interface

 Customer feedback suggests that this industry is expanding and is in a flourishing state. At the same time, these products are environment friendly and do not include any wasteful practices. As a result of this, it results in both customer and environmental benefit in daily operations.


Since SFP OPITC CABLES above provide

10Gtek FTTH Fiber Cable To Individual Homes

FTTH Fiber Cable To Individual Homes

FTTH, or Fiber To The Home, is the delivery of a communications signal over optical fiber from the operator switching equipment all the way to a home or business, replacing existing copper infrastructure such as telephone wire and coaxial cable. FTTH Fiber Cable is a relatively new and fast growing method of providing vastly high-speed broadband services integrating voice, data and video to consumers and businesses.

 Fiber Optic Cable is proved to deliver bundled or individual data, voice and video services to the home more efficiently-and securely-versus traditional copper transport mediums. We are all aware of slow dial-up frustrations, DSL outages, and coax cable issues (Broadband-Cable TV). Once fiber optics deployed as an end to end solution- all these inherent problems associated with copper /coax based transport factilities virtually disappear.

Understanding Sfp Optical Transceivers

Understanding SFP Optical Transceivers

The word SFP is an IT industry term which stands for Small Form Factor Pluggable. An SFP is a variety of Optical Transceiver, which is designed to convert serial electric signals into serial optical signals. SFP modules are typically inserted into a network switch in order to connect a Fiber Optic system with an Ethernet system. The most common applications where SFP modules are used include Fibre Channel and Gigabit Ethernet.

 Industry specifications for the SFP transceiver have been standardized by an agreement called the MSA or Multi Source Agreement between competing manufacturers. The MSA guarantees inter-compatibility between vendor products. The SFP was designed as a predecessor to the GBIC interface, and supports a greater number of transceivers per inch than the GBIC, which is why the SFP is also known as Mini GBIC.

 SFP transceivers can be acquired with a variety of receiver and transmitter types. Users can choose the appropriate SFP transceiver for each Fiber Optic link they are deploying to provide the required reach depending on the type of optical fiber they are using (i.e Multi Mode or Single Mode Fiber). SFP transceivers are available in several different categories including 850 nm 550m MMF (SX), 1310 nm 10 km SMF (LX), 80 km (ZX), 120 km (EX or EZX), CWDM and DWDM. SFP transceivers are also available with a copper cable interface to connect to unshielded twisted pair networking cable.

Since SFP OPITC CABLES above provide

10Gtek SFP+ DAC Twinax Cable 1m, AWG30, Passive

10Gtek SFP+ DAC Twinax Cable 1m, AWG30, Passive

SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. SFP+ cables offers a low cost SFP+ solution. SFP+ directly attached twinax cable assemblies supports 10 Gigabit Ethernet, 10 Fibre Channel, and other industry standards.

10Gtek SFP+ DAC Twinax Cable 1m, AWG30, Passive

Specifications:
● SFP+ to SFP+ Connetor
● Copper Passive
● 1 Meter
● AWG24/AWG30
● Compliant to SFP MSA
● Low power consumption
● Excellent EMI performance
● High reliability
● RoHS Compliant
● Wide operating temperature range:
Standard: 0℃ to +70℃
Industrial: -40℃ to +85℃

Applications:
● 1-8G Fiber Channel and 1-10G Gigabit Ethernet
● Networking, Storage, Telecommunications
● Hub, Switches, Routers, Servers, Network Interface Card(NICs)

Notice:
1. SFP+ Cables can meet compatibility* with Cisco System (Reference "Cisco Compatiblility Metrix").
2. SFP+ Cables can meet compatibility* with HP-Procurve Systems. Please choose by clicking "Compatible List".
3. SFP+ Cables can meet compatibility* with H3C/3COM Systems. Please choose by clicking "Compatible List". H3C/3COM Systems do not support active cables.
4. SFP+ Cables can meet compatibility* with Intel Systems. For Intel Card, Passive SFP+ cable should be within 3 meters ( 3m included) with AWG24. Longer than 3m distrance, you could choose our Active SFP+ cable.
5. SFP+ Cables can meet compatibility* with Brocade Systems. Different Brocade systems may require different coding. Please enter your Brocade system model in the Remark box when ordering.
6. SFP+ Cables can meet compatibility* with Huawei/A-lu/D-link/Extreme/Foundry/Netgearg/Dell/IBM/... Systems. Please choose by clicking "Compatible List".

"Meet Compatibility*" means, WORKING with systems, without link or identification problems.
Please note:
To "meet Compatibility*" with system, we need to modify the eeprom infomation, wtihout short notice. The information include but not limited to "P/N", "Length", "Vender", etc
e.g.
The modification items:
a. To ensure the product compatibility with Cisco System, our SFP+ passive cables with cable lengths of 2 meters, 3 meters, and 10 meters may be coded as SFP-H10GB-CU1M
b. To ensure the product compatibility with Cisco System, SFP-H10GB-ACU7M may be coded as SFP-H10GB-CU1M
c. To ensure the product compatibility with Cisco System, SFP-H10GB-CU1M may be coded as SFP-SR

For more information please visit

10Gtek optic cable

10Gtek SFP+ DAC Twinax Cable 50cm, Passive

10Gtek SFP+ DAC Twinax Cable 50cm, Passive

SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. SFP+ cables offers a low cost SFP+ solution. SFP+ directly attached twinax cable assemblies supports 10 Gigabit Ethernet, 10 Fibre Channel, and other industry standards.

10Gtek SFP+ DAC Twinax Cable 50cm, Passive

Specifications:

● SFP+ to SFP+ Connetor
● Copper Passive
● 0.5 Meter
● AWG24/AWG30
● Compliant to SFP MSA
● Low power consumption
● Excellent EMI performance
● High reliability
● RoHS Compliant
● Wide operating temperature range:
Standard: 0℃ to +70℃
Industrial: -40℃ to +85℃

Applications:

● 1-8G Fiber Channel and 1-10G Gigabit Ethernet
● Networking, Storage, Telecommunications
● Hub, Switches, Routers, Servers, Network Interface Card(NICs)

Notice:

1. SFP+ Cables can meet compatibility* with Cisco System (Reference "Cisco Compatiblility Metrix").
2. SFP+ Cables can meet compatibility* with HP-Procurve Systems. Please choose by clicking "Compatible List".
3. SFP+ Cables can meet compatibility* with H3C/3COM Systems. Please choose by clicking "Compatible List". H3C/3COM Systems do not support active cables.
4. SFP+ Cables can meet compatibility* with Intel Systems. For Intel Card, Passive SFP+ cable should be within 3 meters ( 3m included) with AWG24. Longer than 3m distrance, you could choose our Active SFP+ cable.
5. SFP+ Cables can meet compatibility* with Brocade Systems. Different Brocade systems may require different coding. Please enter your Brocade system model in the Remark box when ordering.
6. SFP+ Cables can meet compatibility* with Huawei/A-lu/D-link/Extreme/Foundry/Netgearg/Dell/IBM/... Systems. Please choose by clicking "Compatible List".

"Meet Compatibility*" means, WORKING with systems, without link or identification problems.
Please note:
To "meet Compatibility*" with system, we need to modify the eeprom infomation, wtihout short notice. The information include but not limited to "P/N", "Length", "Vender", etc
e.g.
The modification items:
a. To ensure the product compatibility with Cisco System, our SFP+ passive cables with cable lengths of 2 meters, 3 meters, and 10 meters may be coded as SFP-H10GB-CU1M
b. To ensure the product compatibility with Cisco System, SFP-H10GB-ACU7M may be coded as SFP-H10GB-CU1M
c. To ensure the product compatibility with Cisco System, SFP-H10GB-CU1M may be coded as SFP-SR

For more information please visit

www.fiberyes.com